Product ID:RP 1126 RESIN PART A
MSDS Date:11/13/1985
FSC:8030
NIIN:01-059-4112
Kit Part:Y
MSDS Number: BHFDH

CIBA-GEIGY CORPORATION-PLASTICS & ADDITIVES DIV.

THREE SKYLINE DRIVE
HAWTHORNE, NY 10532
US

Emergency Phone: 914-347-4700 (SAFETY & HEALTH)

Info Phone: 800-334-9481 (AFTER HOURS)

Preparer: M. MUNSELL

Cage: CIBAG

CIBA-GEIGY CORPORATION, FURANE PRODUCTS

LOS ANGELES, CA 90039 US

Telephone: 818-247-6210

Cage: CIBAG

BENTONITE (AS NUISANCE DUST OR PARTICULATES NOT OTHERWISE

CAS: 1302-78-9

RTECS: CT9450000

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3 TDUST;8990

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

C12 AND C14 ALKYL GLYCIDYL ETHERS

CAS: 68609-97-2

DIGLYCIDYL ETHER OF BISPHENOL A

CAS: 25068-38-6

PARA-IERTIARY BUTYLPHENYL GLYCIDYL ETHER

CAS: 23101-60-8

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYES: MAY CAUSE IRRITATION. SKIN: MAY CAUSE
IRRITATION OR ALLERGIC REACTION. INHALATION: MAY CAUSE RESPIRATORY
REACTION.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS

First Aid:EYES: IMMEDIATELY FLUSH EYES W/WATER FOR 15 MINUTES. CALL
PHYSICIAN. SKIN: WASH W/SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING & LAUNDER BEFORE RE-USE. INGESTION: IF CONSCIOUS, GIVE
PLENTY OF WATER TO DRINK. INDUCE VOMITING BYTOUCHING BACK OF
THROAT W/FINGER. CALL A PHYSICIAN. INHALATION: REMOVE TO
FRESH AIR. GIVE OXYGEN AND/OR ARTIFICIAL RESPIRATION,IF
NEEDED.CALL A DOCTOR.

Flash Point Method:OC
Flash Point:210F/99C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL

Handling and Storage Precautions:AVOID CONTACT WITH EYES, SKIN, AND
CLOTHING. AVOID PROLONGED OR REPEATED CONTACT W/SKIN. WASH
THOROUGHLY AFTER HANDLING.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR SAWING
CURED MATERIAL.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL AND LOCAL EXHAUST IN ACCORDANCE WITH
ACGIH RECOMMENDATIONS.
Protective Gloves:WEAR IMPERMEABLE GLOVES
Eye Protection:WEAR SPLASH-PROOF CHEMICAL GOGGLES
Supplemental Safety and Health
REFERRAL TO A PHYSICIAN IS RECOMMENDED IF THERE IS ANY QUESTION ABOUT
THE SERIOUSNESS OF ANY INJURY.

Spec Gravity:1.47-1.50
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE, MILD COLOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND BASES
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME
Hazardous Decomposition Products:COMBUSTION MAY FORM TOXIC MATERIALS,
SUCH AS CARBON DIOXIDE,CARBON MONOXIDE
Conditions to Avoid Polymerization:EXCESSIVE HEAT FOR PROLONGED PERIODS
OF TIME

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FORMETHOD THAT WILL COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH
AND ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.